Foam arms, foam cannons, and foam lances have recently gained attention. There’s an explanation for that.
Auto care foam, also called snow foam, does a great job as a pre-cleaner before you wash your car.
The foam increases grit and grime, making it easy to wipe and reduce the likelihood of swirl marks and bruises. These special foam gun sprayers are the perfect way to add high-quality foam to your vehicle.
MATCC Flexible Foam Cannon is the perfect foam gun car wash. It is a heavy-duty foam gun made of solid galvanized steel, simple to use, and delivers good quality foaming performance.
The top foam gun fittings need a pressure washer. Some foam items on the market are connected to a hose pipe. We’re not too pleased with their foaming behavior, and we just suggest foam guns that are mounted to pressure washers.
In the following article, we’ll take a look at some of the best and most effective foam blasters on the market and why you should be including them in your garage.
Best Overall: DUSICHIN Adjustable Foam Cannon (SFL-001)
The DUSICHIN Customizable Foam Cannon is competitively priced and has a wide number of favorable reviews. This foam cannon comes with a 1/4-inch speedy fitting and includes a 1-liter bottle.
All of the supplied connectors are made of high-quality bronze, so reliability should not be a problem. Your power washer should have 2.0 GPM and more than 1,000-PSI of pressure to use this foam cannon. Provides a maximum speed of 5.3 GPM and a maximum current of 3,000 PSI.
Built for enthusiasts and practitioners, this product is customizable so that you can monitor the blending as well as how much foam it makes.
Most consumers are highly pleased with the consistency of this foam cannon, but some have reported about the bottle being destroyed. Unfortunately, this is characteristic of many of these foam cannons, because it just comes down to how cautiously you use them.
Pros:
- Its foam deployment is beautifully meaningful until you dial it in for the angle of the soap
- It does a decent job easily and powerfully
- The nozzle switches very quickly from a large fan to a small stream and changes it
Cons:
- Make sure the fasteners are secure before using it
Product specifications:
- Size: 33 OZ (1 litre) container bottle
- Adjustability: 1/4″ quick
- Weight:1 pounds
- Products: Brass, Plastic, Stainless Steel
Runner Up: Best with a Hose: Chemical Guys TORQ Foam Blaster
Now if you don’t even own a water hose but also want to reap the perks of a foam cannon, take a peek at the TORQ Foam Blaster of Chemical Guys.
While it’s a little more costly than that of the other items on our list, this foam cannon can be used with a regular hose, which is perfect if you don’t have a pressure washer in your garage. It is also flexible, which ensures that you can monitor the toxicity ratio of the foam squeezed from the nozzle. The bottle only contains 1 liter (32 ounces).
The nozzle on another foam gun even blocks the flow of water when it’s not in service, letting you hold water when you wash your vehicle. Fitted with a pinpoint spray stick, the easy-to-use lever makes it fast and easy to wash your vehicle. Featuring bronze and metal pieces, this is a perfect choice if you wouldn’t want to buy a pressure washer.
Pros:
- Its order makes it convenient to keep this bottle during use.
- Quality metal connectors have a closed connection that will not collapse under high flow and pressure
Cons:
- The fragile transparent bottle may finish up breaking at the bottom of the shaft if it is not stored correctly.
Product specifications:
- Size: 32 US oz / 946ml container bottle
- Adjustability: 2.0 GPM
- Weight:3,500 PSI
- Products: Electric or Gas Pressure Washer.
Alternative: MATCC Adjustable Foam Cannon
MATCC’s Flexible Foam Cannon is very close to DUSICHIN’s with a 1/4-inch fast disconnect, a 1-liter bottle, and a pressure washer requiring at least 2.0 GPM and more than 1,000 PSI of pressure. Claims to support up to 3,000 PSI of pressure with a maximum flow of 5.3 GPM.
This foam cannon is versatile, helping you to plug the sprayer for every circumstance, along with control of mixing and foam development. This also lets you choose either a pump or a curved spray design, and you can control it whether you like more or less foam.
Quality brass parts make up the foundation and primary frame of this foam cannon, while the foam framework is made of stainless steel.
Pros:
- Adjustable spray hose
- It’s quick to use
- The foam builder is constructed from stainless steel.
- Works with a user manual
- Less shampoo and far less water.
Cons:
- Any consumers may be frustrated by the foam adjuster because it contributes more shape while decreasing the foam richness.
Product specifications:
- Size: 1-liter container bottle
- Adjustability: 5.3 GPM
- Weight:3,000 PSI
- Products: Polycarbonate, carbon steel, and brass products
Alternative: TriNova Foam Cannon and Gallon Car Wash Soap Kit
The foaming machine from TriNova has a big bottle of the reservoir that allows you to wash for a longer period without having to be refilled. Besides, the framework is strategically wide to keep the container from tipping over when put on a flat surface.
The intake knob has an adjustable shape that helps you to monitor the amount of sweat created. This device depends on either a pressure washer, so you need to attach it to the system to get a decent foam supply.
In addition, the nozzle helps you to cover the whole surface of your vehicle with a reliably rich foam. The bottle has a wide-mouth shape that protects the bottle from breaking or fracturing while spraying.
Pros:
- Allows you to adjust the thickness of the foam
- Quickly link 1⁄4-inch female connector
- Multipurpose
Cons:
- Incompatible with a garden hose.
Product specifications:
- Size: 2-liter container bottle
- Adjustability: 4.3 GPM
- Weight:1.17 pounds
- Products: Iron, carbon steel, and brass products
Alternative: MTM Hydro PF22 Professional Foam Lance
The MTM PF22 foam cannon has a specially built nozzle that can be tuned in so many ways. You should change the fan blades to either spray horizontal or vertical depending on the object you are washing.
The chemical injection button is strategically positioned at the top to allow you quick access anytime you need to make adjustments. This foam gun will distribute sprays up to 20 feet, so you can wash your car without spraying it.
You may also set the nozzle to produce jets or bug sprays. Jet sprays are excellent at removing tough dirt and debris, while a large setting will help you get a clean rinse.
Pros:
- Ergonomic design bottle of handle
- Durable filters for steel
- Simple to use
Cons:
- Any consumers can have trouble repairing the connector to a regular pressure washer.
Product specifications:
- Size: 1-liter container bottle
- Adjustability: 1.8 – 5.3 GPM
- Weight:5,000 PSI,
- Products: Polycarbonate, stain steel, and brass products
Foam Blasters FAQ
Can you use a foam cannon with a regular hose?
The utility of a regular hose or foam gun has been hotly discussed by automotive enthusiasts and dealers for years. Some say that they are worthless, others swear by them. The plain reality is that using a foam pistol or foam cannon is all about happiness.
Sure, there is also some truth in the fact that the foamed car shampoo would adhere to the car longer, allowing the chemicals in the soap to remain longer and work their magic.
The true profit, though, is the genuine pleasure and happiness you get as your blast streams of silk white foam over your vehicle.
Regular hose vs Foam Cannon/Lance
Simply place a rubber nozzle on a standard water (garden) hose. Foam cannons, also named foam lances (although this lance is essentially a component of the pressure washer that is mounted to a foam cannon), are being used on pressure washers.
Both can be fitted with a simple attach fitting to allow a quick change of clear rinse water.
Normally, the rubber nozzle on the garden hose would not contain as much foam as the foam cannon on the pressure washer.
Types of Foam Guns
If you look closer, there’s just a couple of regular hose styles on the market. Most regular hoses are only re-labeled models of garden hose pipes.
Functionally, there are currently only two types on the market, adjustable and non-adjustable. If you prefer flexibility and cost reduction, get the non-adjustable. Buy the adjustable if you want adjustability
Types of Foam Cannons
One point about foam cannons that are a little different from foam arms is that fast mating fittings for each foam cannon will vary significantly between brands.
That’s because there’s no universal suitable for pressure washers. You would like to make sure that every foam cannon you purchase has a fast link that matches your brand of a pressure washer or you need to buy one that fits separately.
Do all foam cannons require a pressure washer?
There are two requirements that you’ll want to pay attention to when purchasing a foam cannon. The first is the streaming of water into the cannon component. A lot of people can accommodate up to 2 gallons per minute (GPM).
This feature will be seen opposite the pressure (in pounds per square inch, or PSI). Foam cannons usually require about 1,000 and 3,000 PSIs. Pressure washers from light to medium duty have a pressure of anywhere from 1,400 to 2,500 PSI, so ensure you review the power washer specs and match them with the foam cannon you want.
Types of Foam Cannons
Realize quick is identified as a fast release or quick link, this feature can be seen in most items on the market today. Opposite the flexible nozzle, you can find a 1⁄4-inch connecter fitting connected to each of the pressure washer wands.
Getting the ability to strip foam cannon easily and conveniently anytime you want makes it easy to go between rinsing and washing your car. There is no need to buy a special attachment.
Adjustable foam cannons with this feature can also be modified not only for spraying more or less foam but also for spraying in a fan or stream pattern. Through both of these customizable features, you can configure the dilution ratio depending on how dusty your car is, as well as to adapt it to the areas of the automobile you’re rinsing. The fan pattern fits well over the whole car, while a more specific stream helps you to target such stubborn locations, such as wheel wells.
Indistinguishable nozzle points foam cannons can also come with interchangeable nozzles that are separated by the angle at which they are sprayed. For example, the typical angles maybe 15, 25, and 40 degrees. Although these nozzles are mounted to the edge of the pressure washer paddle and not to the point of the foam cannon, they help to guide the flow of water where it is most required.
Depending on the manufacturer, foam cannon bottles can fall on a continuum between opaque and translucent. Transparent bottles would not allow you to see the liquids, so if you like watching the foam cannon work, you can learn more about a clear bottle style. Although this would not impact how the foam cannon operates, you will need to focus on weight to know when the transparent foam cannon is nearly empty.
Professional Grade A number of suppliers will specialize in selling higher-quality foam cannon called ‘professional grade.’ Yes, what this translates into is heavy-duty components (such as cast iron) that are more capable of withstanding violence.
Fast detach fittings are made of better metals, the bottles themselves are durable and designed for toughness, and thicker foam can also be produced. Superior quality materials often mean higher prices.
What would you recommend about using snow foam?
It’s not always fun to wash your car, but it’s essential if we want to keep the best image for our vehicle. Everything which makes it easier, or more pleasant.
Using a Torq Foam Cannon is doing just that – it provides a thick foam that wants to stick to, and disintegrates, any dirt and grime on the surface of your car. It adds extra hydration and makes the entire process much easier, faster, and less labor-intensive while giving your car a scratch-free wrap-up
How a Torq foam cannon works
When you take the auto to a reputable car wash or a detailing unit, they can attempt to wash any dirt or gravel out of your car as gently as possible, since washing the car improperly will actually drive the dirt around and grind the cracks and swirls into the paint finish.
Torq Foam Cannon works by applying a greased foam and slick car wash that loosens any abrasive mud grains, without anybody ever scratching the surface of the color.
Take these steps on using a foam cannon:
- Fill the bath tank with the soap solution
- Add 1-3 ounces of the selected car wash soap (depending on the size and situation of your vehicle)
- Remove any contaminated material and grime by softly rinsing the vehicle with spray.
- Connect the Torq Foam Cannon Snow Foamer then coat the top of the vehicle with the sweater.
- Using the shampoo mixture power button, carefully tune the foam thickness to the appropriate degree, then cover the vehicle accurately.
- Then the south begins to break down and to lift up some stubborn dirt.
- When the foam slides down the vehicle, it softly pushes the dirt out of it.
- Finish by softly wiping over with a high-quality memory foam fabric or wash-mitt.
Reasons to use a foam cannon
The foam cannon is the ideal way to wash any car using snow foam technology.
- Cleans both cars with intense foam strength
- Requires you to clean your car to the same level as a competent automotive detailing unit.
- Removes debris from even the slightest crack or passageway and removes swirl patterns from the top of the vehicle.
- Components made of solid metal are resistant to degradation and high-quality materials are resistant to toxic UV rays.
- The combination of a foam cannon and a pressure washer uses less water than a traditional hose and bucket wash.
- Advanced air conditioning system blends the right combination of car wash sunscreen, water, and oxygen to produce soapy foam that sticks to every automotive surface.
- It could be used as a “touch-free” washing machine for filthy or dusty cars.
- Requires precise power with a fully flexible, horizontal jet nozzle, making the ideal laundry foam spread.
Conclusion
A foam blaster is not a requirement for information. It is, however, a valuable and enjoyable method for washing your car or for impressing your clients.
If you could spare a change, I’d buy one and check it out. If you don’t like it, you can still flip it or offer it to a professional driver. By erasing as much dirt as probable before you contact the car wash with a wash mitt and shampoo, you help reduce the chances of damaging the paint.
It depends entirely on what you hope to achieve by implementing foam blaster. You’re not going to be able to clean your entire car just by using foam blaster it just isn’t intended with that objective in mind.
Foam blasters include substances and cleaning products intended to be poured onto the surface of the vehicle and allowed to remain. Snow foams are designed to create more foam than a traditional car shampoo.
The thicker foam captures any residue on the vehicle, making it easy to clear when the pressure washer is powered. Foam blasters do not contain additives used in car shampoos that cause the wash mitt to slide through the paintwork. It is necessary to also use the car shampoo for touch washing in order to clean the paintwork securely.
